Services
Services
5levels
Prices are labour. Parts are extra and quoted before we fit them.
01 / 05
Safety check
£35Same day
In by 10:00, ready by 17:00. For bikes that ride but feel wrong.
What we do
- Brakes adjusted, pads measured
- Gears indexed
- Tyres pumped and checked for cuts
- Every bolt torqued to spec
- Chain wear measured
- Written report with prices for anything else
Not included
- Parts
- Wheel truing
- Bearing work
Bench time about 45 min. Turnaround same day.

02 / 05
Standard service
£852 days
Once a year for a bike ridden most days.
What we do
- Everything in the safety check
- Wheels trued in the frame
- Hub, headset and bottom bracket play adjusted
- Drivetrain degreased, chain lubed
- Inner cables lubed and re-tensioned
- Test ride
Not included
- Parts
- New cables or housing
- Bearing replacement
Bench time about 2 h. Turnaround 2 days.
03 / 05
Full overhaul
£1654 days
Stripped to the frame, cleaned, rebuilt. Cables and housing included.
What we do
- Everything in the standard service
- Strip to bare frame
- Hubs, headset and bottom bracket serviced
- New gear and brake cables with housing
- Wheels trued and tensioned on the stand
- Frame cleaned and checked for cracks
Not included
- Parts other than cables
- Hydraulic brake bleed (£22 a brake)
- Suspension servicing
Bench time about 5 h. Turnaround 4 days.

04 / 05
Wheel build
£70per wheel
Hand built to your rim and hub. Tension recorded on a card you keep.
What we do
- Spoke lengths worked out to 0.1 mm
- Laced, tensioned and stress-relieved
- Tension within ±10 % per side
- Dish checked against the frame
- Tension card
Not included
- Rim, hub and spokes
- Rim tape and tubeless valves
Bench time about 2 h 30 min. Turnaround 5 days.

05 / 05
E-bike check
£602 days
Motor and battery read-out plus the safety check, for bikes that weigh 25 kg and stop from 25 km/h.
What we do
- Everything in the safety check
- Diagnostic read of motor and battery
- Firmware updated where available
- Motor and battery mount bolts torqued
- Brake pads and rotors measured
Not included
- Battery cell repairs
- Motor internals
- Parts
Bench time about 1 h 30 min. Turnaround 2 days.
